The DM-RMC-4KZ-100-C provides a simple, single-box interface solution for a single display as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to the DM 8G+, it is also HDBaseT® compatible, allowing it to be connected directly to an HDBaseT-certified source. Its compact, low-profile design allows the DM-RMC-4KZ-100-C to be installed discreetly behind a flat panel display or above a ceiling-mounted projector.
HDR Support
Crestron DigitalMedia (DM®) for AV signal distribution was the world’s first solution to offer end-to-end 4K signal management for large-scale commercial and residential applications. DM “4KZ” endpoints and cards enable new and existing DM systems to handle 4K/60 4:4:4 video signals, as well as HDR (HDR10) video signals, without the need to replace cables or switches. Any Crestron DM system that supports 4K can be upgraded to handle 4K/60 4:4:4 and HDR by simply installing DM 4KZ-based cards, transmitters, and receivers. The DM-RMC-4KZ-100-C is designed to replace an existing DM-RMC-4K-100-C receiver without requiring additional configuration or programming.
DigitalMedia 8G+®
Designed for ultra-high bandwidth and ultimate scalability, DigitalMedia 8G+ (DM 8G+) delivers true single-wire lossless transport for moving high-definition video, audio, power, Ethernet. DM 8G+ carries uncompressed Full HD 1080p, WUXGA, and 2K signals over distances up to 100m using Crestron DM Ultra Cable, Crestron DM 8G® Cable, or third-party CAT5e. Higher resolution signals up to UHD and 4K are supported over distances up to 100m using DM Ultra Cable, 70m using DM 8G Cable, or 50m using CAT5e.
HDBaseT® compatible
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. With the DM 8G+ input, the DM-RMC-4KZ-100-C can be connected directly to an HDBaseT compatible source without the need for a DM transmitter.
Multimedia display interface
A single HDMI digital AV output port is provided on the DM-RMC-4KZ-100-C for connection to a display or other device. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable. A single CAT cable connects the DM-RMC-4KZ-100-C to a DM switch or transmitter or to an HDBaseT source, carrying video, audio, control, network, and power signals over a single, simple RJ45 connection. Multiple DM-RMC-4KZ-100-C can be installed to handle each display in a multiroom distribution system, all powered from a central DM-MD series switch. Or, a single DM-RMC-4KZ-100-C can be powered directly from a DM 8G+ or HDBaseT transmitter.
LAN connectivity
Along with high definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-4KZ-100-C includes a 10/100 Ethernet port, which can be used to provide a convenient LAN connection for a local area network device.
Built-in device control
The DM-RMC-4KZ-100-C includes built-in RS-232, IR and Ethernet control ports to allow programmable control of the display device connected to it (via a control system). It also provides an alternative to such conventional control methods by leveraging the CEC (Consumer Electronics Control) signal embedded in HDMI. By connecting to the control system, the DM-RMC-4KZ-100-C provides a gateway for controlling the display device directly via the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.
USB signal extension (optional)
DigitalMedia allows routing of USB signals alongside video and audio. USB signal extension is enabled on the DM-RMC-4KZ-100-C by adding a Crestron USB over Ethernet Extender module (model USB-EXT-DM-LOCAL or USB-EXT-DM-REMOTE).
Easy installation
The DM-RMC-4KZ-100-C easily mounts to a wall, ceiling or other flat surface. At just over one centimeter deep, it fits easily behind a flat screen or above a ceiling-mounted projector. The unit can be powered using PoDM (Power over DigitalMedia) or an optional wall mount kit (PW-2407WU) for a true single-wire solution. All connections and LED indicators are positioned on the side, providing optimal access and visibility for a clean and functional installation.
